Interrupting timing
Press button 1 to interrupt tim-
ing.
Press button 1 again to re-
sume timing.
Ending timing
Begin by pressing button 1 to
interrupt timing.
To save the reading as the last
lap time, press and hold down
button 1 until --:--:--
appears. Then press button 2
to switch to display mode.
If you do not want to save
the reading, press button 2 to
switch to the display mode.
If more laps are
subsequently timed, lap
numbering resumes. Numbering
is not restarted at lap 1 unless
you delete the current timing
session in the RACE INFO
display mode.
Fastest lap anticipated
This function has to be activated
in the SETUP menu ( 97).
When you start a new lap your
intermediate times are taken
every 100 metres and compared
with the corresponding interme-
diate times of the best lap stored
in memory. If your intermediate
times show that you are faster
than on your previous best lap
the processor anticipates that
this lap will be your new best
6
81
z
On the race track
To Next Page
Loading...
