BMW HP4 - Page 92

Setting parameters
Press and hold down button 2
until the parameter starts to
flash.
Repeatedly press button 1 or
button 2 until the value you
want appears on the display.
When the value you want is
shown:
Press and hold down button 2
until the value stops flashing.
The value is saved.
Exiting SETUP mode
Press and hold down button 1
until the multifunction display
switches to ROAD mode.
A value that is still flashing will
not be saved.
Alternatively: Repeatedly press
button 1 or button 2 until
SETUP RETURN appears on
the display.
When "SETUP RETURN" is
shown:
Press and hold down button 2
to exit the SETUP menu.
SETUP MENU appears on
the display.
Adjusting damping, rear
Adjusting rebound damping on
the rear suspension strut.
6
90
z On the race track