14
Step 3 Loosely attach the Spindle Interlock Top (Z6) to the Z Frame
Assembly with two M4 x 16 Machine Screws and Nuts as shown.
Do not tighten the Machine Screws and Nuts or use
LOCKTITE. They will be tightened in a later step after the Router
has been mounted.
Step 4
Attach the Spindle Top Mount(Z7) to the Z Frame Assembly
with two M4 x 16 Machine Screws and Nuts as shown. Do not
tighten the Machine Screws and Nuts at this stage. They will be
To Next Page
Loading...
