Need help?Do you have a question about the Bolin Technology KBD-1010-R and is the answer not in the manual?
Legal disclaimers and notices regarding the product manual and its contents.
Explanation of symbols used in the manual for safety and operational guidance.
Crucial safety instructions for installation, operation, and maintenance of the product.
Compliance details for FCC Part 15 regulations regarding digital devices and radio frequency energy.
Product compliance with European Low Voltage and EMC Directives.
Information on the product's compliance with the WEEE Directive for responsible disposal.
Lists the standard accessories included with the KBD-1010 keyboard.
Lists optional accessories that may be needed for specific configurations.
Lists the models for which this user guide is suitable.
Highlights the main features and capabilities of the KBD-1010 controller.
Details the various functions and applications supported by the controller.
Identifies and describes the numbered ports on the KBD-1010 keyboard.
Detailed explanation of each numbered button, knob, and dial on the keyboard.
Explanation of the information shown on the keyboard's LED screen.
Details the ports and connection methods for the junction box.
Illustrates how to mix control protocols for PTZ cameras.
Describes the different ways to power the controller.
Details the pin configurations for various ports on the keyboard and junction box.
Instructions for connecting the keyboard to a network via IP.
Guides on establishing serial connections for camera control.
Step-by-step guide for establishing RS232 connections to cameras.
Instructions for establishing RS422 connections for camera control.
Guidance on establishing RS485 connections for camera control.
Setup for controlling cameras using the ONVIF IP protocol.
Setup for controlling cameras using the VISCA over IP protocol.
Explains how to control multiple camera protocols simultaneously.
Details GPI connection for RS422 VISCA control.
Explains GPI connection for VISCA over IP control.
How to mix control protocols in video router switch mode.
Process for exporting camera settings from the keyboard.
Process for exporting keyboard configuration settings.
Process for importing camera settings to the keyboard.
Process for importing keyboard configuration settings.
General setup procedures for the keyboard controller.
Configuration steps for network IP settings on the keyboard.
Adjusting the brightness of the keyboard's backlight.
Customizing function keys for quick access to camera commands.
Restoring the keyboard to its factory default settings.
Configuring Tally and GPI I/O settings for camera status indication.
Procedures for changing or setting the keyboard's password.
How to enable and configure joystick zoom control.
Accessing information about the keyboard's IP address and firmware versions.
Settings for configuring cameras using the Visca over IP protocol.
Selecting between PTZ Controller and Video Router Switch modes.
Steps for manually adding cameras to the keyboard for control.
Manual steps to add ONVIF cameras via LAN.
Auto-searching for ONVIF cameras on the network.
Instructions for adding ONVIF cameras accessible via Wide Area Network.
Manual steps to add VISCA over IP cameras via LAN.
Auto-searching for VISCA over IP cameras on the network.
Instructions for adding VISCA over IP cameras via WAN.
Using the A/B buttons to switch between RS422 ports for camera control.
How to select a camera using its assigned ID.
Selecting IP cameras from a list of available devices.
Accessing the camera's On-Screen Display menu for non-IP cameras.
Accessing the camera's OSD menu for PELCO-D or ONVIF-IP cameras.
Performing pan, tilt, and zoom movements of the camera.
Steps to save camera positions as presets.
Steps to recall saved camera positions.
Procedures for clearing saved camera presets.
Adjusting exposure settings like mode, iris, and shutter speed.
Configuring manual or auto white balance settings.
Setting manual or auto focus for the camera.
Steps to upgrade the keyboard's IP firmware.
Steps to upgrade the keyboard's MCU firmware.
Overview of camera settings configurable via the LCD screen.
Overview of keyboard settings configurable via the LCD screen.
Physical dimensions of the KBD-1010 keyboard unit.
Physical dimensions of the junction box.
General| Model | KBD-1010-R |
|---|---|
| Category | Remote Control |
| Connectivity Technology | Wired |
| Compatibility | Bolin PTZ Cameras |
| Material | Plastic |
| Color | Black |
| Interface | RS-232 |
To Next Page