1 General information about the documentation
For the series of devices ACU (ACTIVE Cube) is for the safety-related commissioning and
operation
to be complied with the following documentation:
• This Operating instructions
• Application manual “Safe Torque Off ACU”
The present documentation refers to the frequency inverters ACTIVE Cube 201 and ACTIVE Cube 401
series. With their factory settings, both series of devices are suited for a wide range of applications.
The modular hardware and software structure enables customer-specific adaptation of the frequency
inverters. Applications with high functionality and dynamics requirements can be realized easily.
The ACTIVE Cube series can be recognized by its label on the case and the identification below the
top cover.
pends on device size)
1.1 Instruction manuals
For better clarity, the documentation is structured according to the customer-specific requirements
made on the frequency inverter.
Quick start guide
The Quick Start Guide describes the basic steps required for mechanical and electrical installation of
the frequency inverter. The guided commissioning supports you in the selection of necessary parame-
ters and the configuration of the frequency inverter by the software.
Operating instructions
The Operating Instructions describe and document all functions of the frequency inverter. The param-
eters required for adapting the frequency inverter to specific applications as well as the wide range of
additional functions are described in detail.
Application manual
The application manual supplements the documentation for purposeful installation and commissioning
of the frequency inverter. Information on various subjects connected with the use of the frequency
inverter is described specific to the application.
If you need a copy of the documentation or additional information, contact your local representative
of BONFIGLIOLI.
10 Operating Instructions ACU
06/13
To Next Page
Loading...
Need help?
General
