HIGH VOLTAGES MAY BE PRESENT!
NEVER ATTEMPT TO OPERATE THIS PRODUCT WITH THE ACCESS
DOORS OR COVERS OPENED!
NEVER ATTEMPT TO SERVICE THIS PRODUCT WITHOUT FIRST
DISCONNECTING POWER TO AND FROM THE UNIT!
FAILURE TO HEED THESE WARNINGS MAY RESULT IN
SERIOUS BODILY INJURY OR DEATH!
THIS PRODUCT WILL GENERATE HIGH AMBIENT TEMPERATURES
DURING OPERATION.
THIS PRODUCT SHOULD BE INSTALLED ON A NON-FLAMMABLE
SURFACE WITH CLEARANCES OF AT LEAST TWO INCHES IN ALL
DIRECTIONS.
ALWAYS ALLOW AMPLE TIME FOR THE UNIT TO COOL BEFORE
ATTEMPTING SERVICE ON THIS PRODUCT.
BEFORE ATTEMPTING INSTALLATION OR REMOVAL OF THIS
PRODUCT, BE SURE TO REVIEW ALL DRIVE AND/OR RESISTIVE
LOAD DOCUMENTATION FOR PERTINENT SAFETY PRECAUTIONS.
INSTALLATION AND/OR REMOVAL OF THIS PRODUCT SHOULD
ONLY BE ACCOMPLISHED BY A QUALIFIED ELECTRICIAN IN
ACCORDANCE WITH NATIONAL ELECTRICAL CODE OR
EQUIVALENT REGULATIONS.
ANY QUESTIONS AS TO APPLICATION, INSTALLATION OR SERVICE
SAFETY SHOULD BE DIRECTED TO THE EQUIPMENT SUPPLIER.
To Next Page
Loading...