User’s Manual
7
1. INTRODUCTION
1.1. WHO SHOULD USE
This manual is intended for use by anyone who is responsible for integrating, installing,
maintaining, troubleshooting, or using this equipment with any AC drive system.
Please keep this manual for future reference.
1.2. PURPOSE AND SCOPE
This manual is a user’s guide for the Model M3645 line regen. It provides you with the
necessary information to successfully install and use the M3645 modules in your
application.
In the event of any conflict between this document and any publication and/or
documentation related to the application, the latter shall have precedence.
1.3. MANUAL VERSION AND CHANGE RECORD
Figure 3-8 and Table 6-5-were updated in Rev 01k.
Figures 3-7, 3-8, and 6-4 were updated in Rev 01l.
Figure 3-8 was updated in Rev 01m.
Table 2-2 was updated in Rev 01n.
Updates were made to Section 6.2 and Table 6-5 in Rev 02a.
Updates to Figures 3-7 and 6-4 were made in Rev 02b.
Updates to drawing numbers and chassis dimensional drawings in Rev 02c.
Updated to include KIT 3645DD and M15 frame size in Rev 02d.
Update to Figure 3-9, Sections 6.2, and 6.6 were made in Rev 02e.
Update to Table 6-1 in Rev 02f.
Figures 3-9 and 3-11 were updated in Rev 02g.
Figure 1-1: Typical M3645 Line Regen
To Next Page
Loading...