bora GP4 User Manual

EN
27
Cleaning and maintenance
www.bora.com
1 3 12
click
click
click
Fig. 7.10 Closing the activated charcoal lter housing cover
[1] Outer locks
[2] Activated charcoal filter housing cover
[3] Central lock
XX
Fold the activated charcoal filter housing cover [2] upwards.
XX
Press the centre of the activated charcoal filter housing cover
until the central lock [3] clicks into place.
XX
Press the sides of the activated charcoal filter housing cover
and close the outer locks [1] until they click into place.
Resetting the filter service display
XX
Reset the filter service display (see the “Operation” chapter).
1 2
Fig. 7.8 Removing the activated charcoal lter
[1] Filter bracket
[2] Activated charcoal filter
XX
Hold the activated charcoal filter [2] with one hand.
XX
Push the filter bracket [1] towards the back.
XX
Pull the activated charcoal filter down and out.
XX
Dispose of the used activated charcoal filter in the household
waste.
Inserting the activated charcoal filter
1 2
Fig. 7.9 Inserting the activated charcoal lter
[1] Activated charcoal filter
[2] Filter bracket
XX
Position the new activated charcoal filter [1] in such a way
that the arrow is pointing towards the back and is visible from
underneath.
XX
Slide the activated charcoal filter into the housing.
XX
Push the activated charcoal filter upwards until the filter
bracket [2] clicks into place.

bora GP4 Specifications

General

Brand	bora
Model	GP4
Category	Cooktop
Language	English