bora GP4 User Manual

EN
28
Troubleshooting
www.bora.com
8 Troubleshooting
Operating situation Cause Remedy
The cooktop or the fan cannot be
switched on.
The fuse or automatic circuit breaker of the
electrical wiring system in the apartment and/
or house is defective.
Replace the fuse.
Switch the automatic circuit breaker
back on.
The fuse or the automatic circuit breaker trips
several times.
Call the BORA Service Team.
The power supply is disconnected. Have a specialist electrician inspect the
power supply.
Odours and vapours arise when the new
cooktop is put into operation.
This is normal on brand-new appliances. Wait a few operating hours. Contact the
BORA Service Team if the odour pers ists.
v
is displayed by the cooking zone indicator.
No or unsuitable cookware has been placed on
the cooking zone.
Only use suitable cookware. Select the
cookware size depending on the cooking
zone (see the “Appliance description”
chapter).
L is displayed by the cooking zone indicator.
The childproofing feature is activated. Switch off the childproofing feature (see
the “Operation” chapter).
A cooking zone or the entire cooktop
switches off automatically.
The operating time of a cooking zone has been
exceeded.
Put the cooking zone back into operation
(see the “Operation” chapter).
The overheating protection has tripped. (see the “Appliance description” chapter)
The power setting is automatically shut off
prematurely.
The overheating protection has tripped. (see the “Appliance description” chapter)
E is displayed by the fan level indicator.
One or more sensor buttons are covered, e.g.
due to finger contact or by objects placed on
them.
Clean the operating panel or remove
objects (see the “Appliance description”
chapter).
ER03 is shown across all 4 cooking zone
indicators and the cooktop switches off
during operation.
The cooling fan continues to run after the
cooktop has been switched off.
The fan will continue to run until the cooktop
has cooled down and will then switch off
automatically.
Wait until the cooling fan switches off
automatically.
E is displayed by the cooking zone indicator.
An error has occurred in the electronic system. Switch off the cooktop power supply for
approx. 1 minute. If the problem continues
to persist after the power supply has been
restored, write down the error number and
contact the BORA Service Team.
F is displayed by the fan level indicator.
The period of use of the filters has been
exceeded.
Replace the activated charcoal filter (with
recirculation only) and thoroughly clean
the stainless steel grease filter. In case of
heavy soiling, replacing the stainless steel
grease filter is also recommended (see
the “Cleaning and maintenance” chapter).
The extraction performance of the cooktop
extractor has decreased.
The stainless steel grease filter is heavily
soiled.
Clean or replace the stainless steel grease
filter.
The activated charcoal filter is heavily soiled
(BIU only).
Replace the activated charcoal filter.
There is an object in the air guiding housing
(e.g. cleaning cloth).
Remove the trapped object.
The fan is defective or a duct connection has
become loose.
Contact the BORA Service team.
Tab. 8.1 Resolving a fault
XX
In all other instances, contact BORA After Sales Service
(see the “Warranty, technical service and spare parts” chapter).

bora GP4 Specifications

General

Brand	bora
Model	GP4
Category	Cooktop
Language	English