Монтаж и пуск INGENIO COMPACT ИБП 10÷20 кВА
Installation and start-up of INGENIO COMPACT 10÷20 kVA
OMS90050 РЕД. / REV.A
51
3.2 HANDLING OF THE UPS
The UPS is packed on a pallet. It is handled from the transport vehicle to the installation (or
storage) place via a fork lift.
The device has a heavy weight
Avoid turnover during the transport of the UPS.
Cabinets must always be handled in upright position.
During loading and unloading operations, always respect the indications
regarding the device barycentre marked on the package.
Before positioning the UPS, in order to avoid risks of turnover, it’s recommended to move the
system on the wood pallet on which the UPS is fixed.
Before the positioning in the final location, remove the UPS from the pallet.
Handling of the UPS
The UPS INGENIO COMPACT 10÷20 kVA can be handled by means of the four
wheels fixed on the bottom.
Picture 2 – Handling of the INGENIO COMPACT UPS 10÷20 kVA
To Next Page
Loading...
