Bosch 1 687 010 398 - 3.3 Scope of Delivery; 3.5 Commissioning; 3.5.2 Dismantling EPS 200 Clamping Arm

1 689 989 188 2016-12-20| Robert Bosch GmbH
Product description | 1 687 010 398 | 21 en
3.3 Scope of delivery
Designation Order number
Mount 1 685 200 162
Holder for mount with
hexagon socket head bolt M6 x 25 (3x)
1 685 305 116
–
CRIN return adapter accessory set 1 687 016 038
Injection chamber 1 682 312 053
Inlet connector
2 O-rings 9.5 x 2
1)
1 683 386 166
1 680 210 143
Hose (return) 1 680 712 360
Adapter cable for CRIN 1 684 465 843
Operating instructions 1 689 989 188
Rating plate –
1)
The additional O-rings are intended as spare parts for the inlet
connector
3.4 Special accessories
Information on special accessories can be obtained
from authorized Bosch dealers.
Designation Order number
Test adapter A1i 1 685 720 297
Test adapter A2i 1 685 720 314
Test adapter A3i 1 685 720 296
Test adapter A4i 1 685 720 316
Test adapter A5i 1 685 720 300
Test adapter A6i 1 685 720 318
Test adapter A7i 1 685 720 320
Test adapter A8i 1 685 720 322
Test adapter A9i 1 685 720 324
Test adapter A10i 1 685 720 326
Test adapter A11i 1 685 720 328
Test adapter A12i 1 685 720 330
Test adapter A13i 1 685 720 332
Test adapter A14i 1 685 720 334
Test adapter A15i 1 685 720 336
Test adapter A16i 1 685 720 338
3.5 Commissioning
3.5.1 Attaching rating plate
¶ Attach the rating plate included in the scope of de-
livery to the back of the EPS200.
3.5.2 Dismantling EPS200 clamping arm
1. Slacken off the clamping bolt (Fig.1, Item1) at the
clamping arm.
2. Remove the clamping arm (Fig.1, Item2).
458883-01_Ko
1
2
Fig. 1: Removing clamping arm
3. Remove the hexagon socket head bolts (2x) at the
clamping arm (Fig.2).
4. Remove the clamping arm and clamping bolt.
458883-02_Pal
Fig. 2: Removing clamping bolt with holder