Bosch Sensortec"| BST-BMP581-DS004-02 53 | 74
Modifications reserved | Data subject to change
without notice Document number: BST-BMP581-DS004-02
int_od:(bit offset: 2) INT pin:
Values Description
0b0 (0x0) push-pull
0b1 (0x1) Open_drain
int_en:(bit offset: 3) Interrupt enabling:
0b0 (0x0) disabled
0b1 (0x1) enabled
pad_int_drv:(bit offset: 4) Pad drive strength for INT (MSB should be set in INT open drain config only.) Note: these
register fields should be read-back only after waiting at least 1¬μs after they have been written
To Next Page
Loading...
