DS7200V2-UK Installer's Guide Copyright 2007 Bosch Security Systems, Inc. P/N: 4998152533-02 Page 135
PART IV: REFERENCE MATERIALS
65.0 User Keypad Commands
Function Keypad Sequence
Turn the System All On: [On] key or [#][1]
Turn the System Perimeter Only On: [Perimeter Only] key or [#][2]
Turn the System Partial On: [#][3]
Bypass Zones: [Bypass] key
Turn the System Off: Enter a valid User PIN
Silence Alarms: Enter a valid User PIN
Table 49: System Arming/Disarming Functions
Function Keypad Sequence
View Faulted Zones: [*] key
System Reset: [System Reset] key or [#][4][7]
Check System Troubles: [#][4]
View Alarm Memory: [#][4][0]
System Test: [#][4][1]
View System Trouble: [#][4][2]
Remote Program: [#][4][3]
Walk Test: [#][4][4]
Change Date & Time: [#][4][5]
View Zone Trouble: [#][4][8]
Keypad Adjust: [#][4][9]
Move to Area: [#][5][0]
Extend Auto-On Time: [#][5][1]
Change Skeds: [#][5][2]
Renew One-time PINs: [#][5][3]
Change Outputs: [#][5][4]
Change PIN: [#][5][5]
Change Another User’s PIN: [#][5][6][1]
Change Another User’s PIN Authority Level: [#][5][6][2]
Add a PIN: [#][5][6][3]
Delete a PIN: [#][5][8]
Turn Chime On/Off: [#][6][1]
Select Chime Tone: [#][6][2]
Select Chime Zones: [#][6][3]
Set Partial On Zones: [#][6][5]
All Areas On: [#][8][0]
All Areas Off: [#][8][1]
Auto-Forward On/Off: [#][8][2]
Auto-Forward On Setup: [#][8][3]
Auto-Forward Off Setup: [#][8][4]
View Log: [#][8][5]
Enable Installer PIN [#][9][2]
Table 50: Other System Functions
To Next Page
Loading...
