18 en | Installation FLEXIDOME multi 7000i IR
2023-02 | 02 |
Installation manual
Bosch Security Systems B.V.
Grounding
Warning!
Trained electricians only!
Work at electric appliances must only be carried out by qualified technicians.
To ground the camera:
1. Remove the screw from the bottom of the camera base.
2. Install the ring terminal (not supplied with the camera) on the screw.
3. Hold the camera base and attach the screw with the grounding cable.
5.2.2 Installation steps
1. Put the cord of the camera base through the hook on the mounting plate to secure the
camera base during installation.
To Next Page
Loading...
