EasyManua.ls Logo

Bosch FLEXIDOME multi 7000i IR - Safety; Safety Message Explanation; Safety Precautions; Important Safety Instructions

Bosch FLEXIDOME multi 7000i IR
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FLEXIDOME multi 7000i IR Safety | en 5
Bosch Security Systems B.V.
Installation manual
2023-02 | 02 |
1 Safety
Read, follow, and retain for future reference all of the following safety instructions. Follow all
warnings before operating the device.
1.1 Safety message explanation
In this manual, the following symbols and notations are used to draw attention to special
situations:
Danger!
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
!
Warning!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
!
Caution!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
i
Notice!
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
1.2 Safety precautions
!
Caution!
Installation should only be performed by qualified service personnel in accordance with the
National Electrical Code (NEC800 CECSection60) or applicable local codes.
1.3 Important safety instructions
To clean the device, do not use liquid cleaners or aerosol cleaners.
Do not install the device near any heat sources such as radiators, heaters, stoves, or
other equipment (including amplifiers) that produce heat.
Do not spill liquids on the device before installation is completed.
Take precautions to protect the device from power and lightning surges. Refer to NFPA
780, Class 1 & 2, UL96A, or the equivalent code appropriate for your country/region, and
to local building codes.
If powered by a power adapter, the adapter should be properly grounded. The power
cord must be connected to a socket or outlet with a ground connection.
Use green/yellow (green with yellow stripe) ground wires.
Adjust only those controls specified in the operating instructions.
Operate the device only from the type of power source indicated on the label.
Unless qualified, do not attempt to service a damaged device yourself. Refer all servicing
to qualified service personnel.

Related product manuals