Bosch FLEXIDOME multi 7000i IR - Wiring the Camera Base

22 en | Installation FLEXIDOME multi 7000i IR
2023-02 | 02 |
Installation manual
Bosch Security Systems B.V.
5.2.3 Wiring the camera base
Network connection
1. Connect the network cable to the network connector.
Auxiliary connections - power connection
i
Notice!
IP66 water/dust protection
For IP66 water/dust protection, use cables with a diameter of at least 5mm.
i
Notice!
IP66 water/dust protection
If you split up the auxiliary connections into two cables before routing them through the M20
rubber grommet, the camera loses the IP66 water/dust protection. Route only one cable
through the M20 rubber grommet to keep the IP66 water/dust protection.