Bosch FLEXIDOME multi 7000i IR - Installing the Camera Dome Cover; Optional Mounting Accessories

28 en | Installation FLEXIDOME multi 7000i IR
2023-02 | 02 |
Installation manual
Bosch Security Systems B.V.
5.4 Installing the camera dome cover
1. Position the camera dome cover on the camera base, so that the triangle icons on the
camera base and on the camera dome cover match.
2. Tighten the 6 captive screws of the screw holes in the camera dome cover between 1 and
2Nm.
TR20
3. Remove the protective cover from the bubble.
5.5 Optional mounting accessories
NDA-7050-PIPW Pendant interface plate.
NDA-7051-CA Conduit adapter M25 (5
pieces).