Bosch FLEXIDOME multi 7000i IR - Table of Contents

FLEXIDOME multi 7000i IR Table of contents | en 3
Bosch Security Systems B.V.
Installation manual
2023-02 | 02 |
Table of contents
1
Safety 5
1.1 Safety message explanation 5
1.2 Safety precautions 5
1.3 Important safety instructions 5
1.4 Notices 6
2
Short information 8
3
System overview 9
3.1 Product description 9
3.2 Intended use 10
3.3 Using the camera 10
3.4 Operation with external systems 10
4
Planning information 12
4.1 Unpacking 12
4.2 Parts included 12
4.3 Preparation 13
4.4 Network and PoE++ 13
5
Installation 14
5.1 Installing the mounting plate 14
5.1.1 Installing the mounting plate without conduit 15
5.1.2 Installing the mounting plate with conduit (NDA-7051-CA) 15
5.2 Installing the camera base 17
5.2.1 Before the installation 17
5.2.2 Installation steps 18
5.2.3 Wiring the camera base 22
5.2.4 Connecting a wireless USB dongle 24
5.3 Setting the position of the multi-imager lenses 25
5.3.1 Panning each of the four lenses over the ring 25
5.3.2 Tilting each of the four lenses 26
5.3.3 Rotating each of the four lenses 26
5.3.4 Rolling each of the four lenses 27
5.4 Installing the camera dome cover 28
5.5 Optional mounting accessories 28
6
Configuration 32
6.1 Bosch Project Assistant 32
6.2 Browser connection 32
6.2.1 Establishing the network 32
6.2.2 Protected network 32
6.3 Bosch Video Client 32
6.4 Video Security Client 33
7
Troubleshooting 34
7.1 Resolving problems 34
7.2 Testing the network 34
7.3 Customer service 35
8
Maintenance 36
8.1 Cleaning 36
8.2 Repair 36
8.3 Reset 36
9
Decommissioning 38