Bosch GLM 100-25 C - Timer Function

English | 15
– Adjusting the Dimming Time
– Setting display brightness
– Switching automatic screen rotation on and off
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Use the button or button to select the required setting.
To confirm a selection, press the button.
To exit the Basic settings menu, press the button or the button.
Switching On and Off Bluetooth®
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select .
To change the selection, press the button or the button.
To confirm the selection, press the button.
To exit the Basic settings menu, press the button or the button.
Timer
The timer function helps, for instance, with measuring at difficult-to-access points, or
should measuring tool movements be prevented during the measurement.
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select .
Select the required time span from release to measurement and confirm with the
button or the button.
Press the button to switch on the laser beam and aim for the target point.
Press the button again to start the measurement.
Bosch Power Tools 1 609 92A 7E1 | (14.12.2021)