Bosch GLM 100-25 C - PRO360 Inlinegrafik; Device Information Inlinegrafik

18 | English
To confirm the selection, press the button.
To exit the Basic settings menu, press the buttonor the button.
The selected device setting remains saved after you switch off the measuring tool.
PRO360
Initial activation is required. Data can only be transferred using a suitable app or computer
program. PRO360 can be deactivated again at any time.
GLM 100-25 C: After changing the battery, the measuring tool must be switched on once
to restart PRO360.
You can find additional information about PRO360 at www.pro360.com.
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
To change the selection, press the button or the button.
To confirm a selection, press the button.
To exit the Basic settings menu, press the button or the button.
Device Information
Here you will find information about the measuring tool, such as the serial number, soft-
ware version and licences.
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
To exit the Basic settings menu, press the button or the button.
1 609 92A 7E1 | (14.12.2021) Bosch Power Tools