Bosch GLM 100-25 C - Switching audio signals on and off Inlinegrafik; Adjusting the Cut-Off Time InlinegrafikMTBosch BlauDisplay; Adjusting the Dimming Time Inlinegrafik

English | 19
Switching audio signals on and off
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
To change the selection, press the button or the button.
To confirm a selection, press the button.
To exit the Basic settings menu, press the button or the button.
Adjusting the Cut-Off Time
The automatic cut-off time is adjustable: 2, 5, 10 minutes or never.
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
To change the selection, press the button or the button.
To confirm the selection, press the button.
To exit the Basic settings menu, press the button or the button.
Adjusting the Dimming Time
The display illumination is continuously switched on. If no button is pressed, the display
lighting is dimmed after approx. 30 seconds to preserve the rechargeable battery. The
time until the start of dimming is adjustable.
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
Bosch Power Tools 1 609 92A 7E1 | (14.12.2021)