Bosch GLM 100-25 C - Date & time Inlinegrafik; Changing the Unit of Measurement Inlinegrafik; Changing the Unit of Measurement of an Angle Inlinegrafik

English | 17
Date & time
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu .
Select .
Set the date and time according to the instructions on the display and confirm with
the button.
To exit the Basic settings menu, press the button or the button.
Changing the Unit of Measurement
The default unit of measurement is "m" (metres).
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
To change the selection, press the button or the button.
To confirm a selection, press the button.
To exit the Basic settings menu, press the button or the button.
The selected device setting remains saved after you switch off the measuring tool.
Changing the Unit of Measurement of an Angle
Basic setting is the angle unit "°" (degrees).
Briefly press the button or press and hold the button to open the Basic set-
tings menu.
Select the Tool settings menu.
Select .
To change the selection, press the button or the button.
Bosch Power Tools 1 609 92A 7E1 | (14.12.2021)