Bosch HPC 400 Installation Instructions For Contractors

(@) BOSCH
Basic principles of operation
4
4.1
Basic principles of operation
Overview of control elements and symbols
3 )----1HI;::::,
I-
2 )----lHII:::::J
Ca-II-- -{4
-
cs-J/ ---{ S
!)
alH----{6
~===:;;;;;;::===~
--T\\,--------f,---{7
If the display lighting is off, pressing a control element
executes the command in question and switches the
lighting on . When you press the selector for the first
time , only the lighting is activated (no commands are
executed) .If no control element is actuated, the lighting
turns off automatically .
Fig. 1 Control elements
~
~ Press and hold to individually adjust the favourites menu (~ user interface operating instructions) .
2
;..
extra DHW ~ Press to activate extra DHW
operating '
~
3
.:..
~
4
menu
c=
5
Info
c::::»
Table 2 Control elements
DHWkey
menu key
Info key
~Press to select the operating mode for DHW (~ user interface operating
~Press to open the main menu ( ~user interface operating instructions).
~Hold to open the service menu .
If a menu is open :
~Press to call up more information about the current selection .
If the standard display is active :
~ Press to open the info menu (~ user interface operating instructions) .
Back key ~Press to return to the higher menu level or discard a changed
If the need for a service or a fault is displayed :
~ Press to switch between standard and fault display .
~ Hold to switch from a menu to the standard display .
----- --
Selector I ~ Turn to change a setting value (e.g . temperature) or select from among the menus or menu
on .
~ Press to open a selected menu or menu item , confirm a set value (e.g. temperature) or a message orto close a pop-
up window .
If the standard display is active and the lighting is switched on :
~ Press to activate the input field for selecting the heating/cooling circuit in the standard display (systems with at
least two heating/cooling circuits only , ~ user interface operating instructions) .
I HPC 400 - fi 720821 7 i2 120111011 5

Bosch HPC 400 Specifications

General

Brand	Bosch
Model	HPC 400
Category	Control Panel
Language	English