Bosch HPC 400 Installation Instructions For Contractors

(@ BOSCH
4.3
Operating the service menu
If the display lighting is off , pressing a control element
executes the command in question and switches the
lighting on . When you press the selector for the first
time, on ly the lighting is activated (no commands are
executed) . If no control element is actuated , the lighting
turns off automatically.
Closing and opening the service menu
Table 4
~ If no sub · menu is open , press the Back key to switch to the
standard display .
I
~ · or - I
... Press and hold the Back key for a few seconds to switch to the
standard display .
Navigating through the menu
Turn the selector to hi ghlight a menu or a menu item .
Press the selecto r.
The menu or the menu item is displayed .
-
Press the Back key to return to the higher menu level.
Table 5
Chang i ng setting values
o > Pre" fu",''''''' to ,,"',m U. ~'''M
The input field and the slider are enabled .
\'
~ Turn the selector to set the setting value between minimum
Q I> ,," m",'m"m
I
L
Table 6
~ Press the selector to select the entry .
~ Press the selector again to cancel the select i on . I
~ Repeat the action steps until the desired entries are selected .
switching time or the
corresponding operating mode .
~ Press the selector to activate the input field for the sw i tching
I time or the operating mode .
~ Turn the selector to change the setting value . ___ 1
Basic principl es of operation
Confirming or rejecting the change
Ta b le 7
Press the selector to activate the marked entry or to confirm
the change .
Turn the selector to highlight Continue and press the
selector.
The Display switches to the higher menu level. The user
interface operates with the modified setting .
Performing a quick start
Activating quick start
men u
~
Info
~
Ta b le B
~ Open the service menu .
~ Press and hold the menu and i nfo keys until a pOP ' up window
a pp ears on the display.
The heat pump will start when there is a heat requirement.
Press the selector .
The menu or the menu item is displayed .
HPC400-672082177212017/07) 7

Bosch HPC 400 Specifications

General

Brand	Bosch
Model	HPC 400
Category	Control Panel
Language	English