Bosch ICP-MAP5000-2 - Page 24

88 pages

To Next Page

To Previous Page

24 en | Installation MAP 5000

2016.06 | 17 | F.01U.168.332 Installation manual Bosch Sicherheitssysteme GmbH

Aligning the accessory mounting plate

ICP-MAP0111

ICP-MAP0020

4 Ensure that the locking clips snap into the bottom mounting rail as shown in the figure

below.

Installing the accessory mounting plate

Refer to Accessory mounting plate overview, page 25 for the locations of the modules that

mount on the accessory mounting plate.

Main Page

Table of Contents3
Introduction5
Short Information5
Listings and Approvals5
Battery Handling5
Installation Considerations5
Planning the System6
Planning the System with IPP-MAP0005 Power Supply7
Planning the System with ICP-MAP0012 CAN Splitter Module10
System Overview12
Installation15
Removing the Enclosure Knockouts15
Installing the Tamper Switch Rail16
Mounting the Enclosure17
Checking the AC Connection19
Installing the Power Supply and AC Terminal Block19
Installing the TAE Box22
Installing the Accessory Mounting Plate23
Installing the 12 V Converter25
Installing the Fuse Plate (SIV)26
Installing the at 2000 Communicator27
Installing the Hinged Mounting Plate32
Mounting the Main Panel35
Installing the ICP-COM-IF Relay Module36
Installing and Connecting the ITS-MAP0008 Wireless Modem37
Antennas38
Connections40
Connecting the Data Bus40
Internal / External Data Bus42
Topology of the External Data Bus42
Splitting the External Data Bus with a CAN Splitter Module43
Connecting the Control Center43
Connecting the Main Panel44
Connecting the Power Supply45
Connecting the LSN Gateway46
Optional Connections48
Installing and Connecting the Tamper Switch50
Installing the ICP-MAP0060 Enclosure Lockset52
Installing the Control Center54
Connecting the Operating and Display Panel54
Mounting54
Connection55
Programming Instructions for ISP-EMIL 12056
Final Power Connections56
IP Interface57
Initial Set-Up and Programming58
Initial Set-Up58
Programming58
Standard-Compliant Programming59
Panel Software59
Checking the Software Version59
Help for the Programming Software59
En | Table of Contents MAP60
Software Updates60
Manufacturer Authorization60
Completing the Installation60
Point Types and Point Evaluation60
Output Functions61
Programmable Output Signals61
Sirens and Communicator in Accordance with EN50131 Grade 363
Enclosure Options65
ICP-MAP0115 Power Enclosure65
Rack Mount Option for ICP-MAP0120 Expansion Enclosure66
Maintenance and Service67
General Information67
Installer Button67
Technical Specifications69
Appendices72
Requirements in Accordance with Vds Class C72
Selecting the Default Setting72
Power Supply for Areas72
Control Centers and Display Panel72
Connection to a Management System72
Printer Connection72
Access Levels72
Requirements in Accordance with en 50131 Grade 375
Selecting the Default Setting75
Connectable Peripherals75
Arming / Disarming Without Entry / Exit Delay75
Arming / Disarming with Entry / Exit Delay75
Arming with Automatic Bypass77
Automatic Arming / Disarming77
Alarm Output Via Siren and Communicator78
Connection to a Management System78
Printer Connection78
Access Levels78
Additional Functions of the Main Panel81
Requirements in Accordance with SES81
Selecting the Default Setting81
Automatic Arming / Disarming82
Areas with Blocking Time82
Access Levels82
Tamper Surveillance of the Main Panel85
Alarm Reporting86

Related product manuals

Bosch ICP-AMAX4-P2-EN

Bosch Solution 6000-IP

44 pages

Bosch DIVAR IP 7000 2U

64 pages

Bosch MIC IP starlight 7000i

79 pages

Bosch Solution 6000-IP CC615GWF

52 pages

Bosch SOLUTION 6000

48 pages

Bosch ICP-MAP5000-2 - Page 24

Table of Contents

Related product manuals