Bosch ICP-MAP5000-2 - Installing the hinged mounting plate

32 en | Installation MAP 5000
2016.06 | 17 | F.01U.168.332 Installation manual Bosch Sicherheitssysteme GmbH
2.11 Installing the hinged mounting plate
4 Install the ICP-MAP0025 hinged mounting plate inside the enclosure ICP-MAP0111 or ICP-
MAP0120.
Installing the hinged mounting plate
ICP-MAP0111
ICP-MAP0025
Mounting modules onto the hinged mounting plate
The following graphic shows an overview of the hinged mounting plate and the designated
mounting locations of the modules.