70 en | Technical Specifications MAP 5000
2016.06 | 17 | F.01U.168.332 Installation manual Bosch Sicherheitssysteme GmbH
Number of devices
MAP LSN gateways 8
MAP control centers 32
DR2020T printer 1 (in VdS systems for service purposes only)
MAP power supplies 150W 32
MAP CAN splitter modules 8
Ethernet interface 1, RJ 45 connection
Management system connection Via Ethernet interface and the Open Intrusion
Interface OII or the MAP OPC server from
Bosch - in VdS systems, only feedback-free
connection as information system via
exclusive transmission path
Number of inputs
Programmable inputs on LSN Bus Limited to maximum number of available
addresses system wide
Number of inputs (on MAP main panel) 8
Number of outputs
Programmable outputs on LSN Bus Limited to maximum number of available
addresses system wide
Power drive (on MAP main panel) 2
Dry contact (on MAP main panel) 2
Auxiliary power (on MAP main panel) 1
Supervised output (on MAP DE module) 3
Open-collector output (on MAP DE module) 2
1
VdS system is limited to two areas, when connecting to the MAP control centres via the
internal and external BDB. More areas can be realized with additional operating and display
panels (one per area) on the LSN bus or with additional control centers on the external BDB
using the CAN splitter module.
Environmental
Minimum operating temperature in °C -10
Maximum operating temperature in °C 55
Minimum storage temperature in °C -20
Maximum storage temperature in °C 60
Minimum relative humidity in % 5
Maximum relative humidity in % 95
Protection class IP30
IP31 (with an edge protection profile)
To Next Page
Loading...
