MAP 5000 Appendices | en 73
Bosch Sicherheitssysteme GmbH Installation manual 2016.06 | 17 | F.01U.168.332
1. Open control panel enclosure.
or
authorize from RPS with an AE 2 user with corresponding permissions (control center:
main menu page 2 > RPS).
2. Establish a connection between the panel and RPS.
AE 4 Access for manufacturers via RPS for MAP
1. Authorize the manufacturer user with an AE 2 user with corresponding permissions
(control center: main menu page 1 > maintenance page 3 > manufacturer permission).
2. Open control panel enclosure.
Switch to installer mode = AE 3 (Installer button, page 67).
3. Login with the passcode of the manufacturer at the installer control center (Manufacturer
authorization, page 60).
4. Establish a connection between the panel and RPS.
Functions of the access levels
The assignment of the functions to the access levels 2 and 3 can be adapted in RPS.
Further subdivisions are possible within the access levels if the owner wishes to grant the
users different permissions: User Manager > Permission Sets
General permissions Access level
1 2 3 4
May silence buzzer on control center X X
May change own user passcode X X X
May transmit/receive programming with RPS X
May receive history with RPS X
May perform diagnostics with RPS X
May perform software updates with RPS X X
Operations category permissions 1 2 3 4
May disable device X
May enable device X
May turn chime on/off X X
May change schedule X X
May edit blocking time X X
User category permissions 1 2 3 4
May add user X X
May delete user X X
May change user passcode X X
Event category permissions 1 2 3 4
May clear internal alarm X X
May clear external alarm X X
To Next Page
Loading...
