If in doubt, look it up
85
Menu
items on the display
"
Y
ou can reset the charge counter for the displayed call and the total of all
calls (the latter if enabled by your BOSCH TELECOM service represen-
tative).
This allows you to dial numbers that are stored in the system, regardless of
your authorization. When you enter the code dial number
, the complete
number is dialed automatically
. Y
ou can postdial additional digits after the
code dial number (e.g. a DID number).
Y
ou speak to two parties simultaneously
. Each of the three can speak to
each of the others (only possible with refer-back participants).
T
urn the display lighter or darker
.
Correct the specified number by pressing the “Enter” key (can also be used
for numbers dialed with the redial key).
Costs per unit: Enter the current cost per unit charge (3 digits).
If your telephone network and PC network are connected together for
CST
A (Computer Service T
elephony Application) and the function CST
A
Answer Call is cleared, you can receive calls on your PC. When the tele
-
phone rings, click on the icon for CST
A Answer Call on your PC screen.
The telephone is thus switched to “Handsfree talking”, and you can talk to
the caller
.
Enter the current code (PIN) to unlock the telephone.
Clear
call charges
Code dialing
Conference
Contrast 1...5
Correction
Costs per unit:
CSTA Answer Call
-
Current
PIN
To Next Page
Loading...
