S
If in doubt, look it up
92
Menu
items on the display
"
Y
ou can activate or deactivate the ringing tone.
If the ringing tone has been deactivated, you will hear a one-time signal to
indicate an incoming call.
Deactivate second call in the “Specifications” menu (only possible in idle
mode) if you do not want to be disturbed by additional calls. These calls are
entered in the call list. Y
ou can also activate this function during a call if you
have assigned the “Second call” function to a function key
.
Setup partner display: Y
ou can stipulate whether the conversation status of
individual telephones from your partner group should be displayed.
Setup partner beep: Y
ou can have calls for a subscriber from your partner
group signaled simultaneously on your telephone.
Setup partner display: Y
ou can stipulate whether the conversation status of
individual telephones from your partner group should be displayed.
Setup partner beep: Y
ou can have calls for a subscriber from your partner
group signaled simultaneously on your telephone.
Adjust the volume of the signal tone.
Y
ou can turn of
f the signal tone.
Change the sound pattern of the ringing tone.
Change the sound pattern of VIP ringing.
Ringing
tone
Second call
Setup partner display
Setup partner beep
Setup partner display
Setup partner beep
Signal 1...8
Signal tone off
Soundcall 1...8
Sound VIP 1...8
To Next Page
Loading...
