T
If in doubt, look it up
93
Menu
items on the display
"
Starts the speech path test. Y
ou can test the receiver and the monitoring
function by blowing into the receiver
.
The symbol for “Handset of
f-hook” appears on the display when the hand
-
set is lifted.
The symbol for “Monitoring on” appears on the display when the monitoring
function is turned on.
Store your input, e.g. your new PIN.
Y
ou can store data “immediately” at any time.
Warning: Y
ou could damage the software if you pull out the plug of your
telephone while saving data!
Enter the time at which the data is to be stored. The default setting is
00:00. The telephone cannot be used during storage.
Y
ou can decide whether your data is to be stored in a permanent memory
.
This function can be used to activate various test procedures.
The telephone cannot be used during testing.
Y
ou can store up to 10
call numbers, one emergency destination and your
own call number on speed-dial keys.
Y
ou can send tone-dialed digits during a call,
e.g. to activate an answering machine.
Speech
path
Store
Store data Immediately
Store data at
Store data on/off
Test mode
Telephone book
Tone dialing next
To Next Page
Loading...
