Bosch INTEGRUS - Page 38

38 en | Installation INTEGRUS
2023-01 | V01 |
User manual
Bosch Security Systems B.V.
It can be wall-mounted using 5mm (0.19inch) screws, with a head diameter of 9mm
(0.35inch). The screws and plugs delivered with the LBB4560/50 are designed to mount the
unit on a solid brick or concrete wall. Two holes, 8mm in diameter and 55mm in depth, must
be drilled 500mm apart (see the next figure).
!
Warning!
To comply with UL and CSA regulations, the charging cabinets must be mounted in such a
way that they can be easily removed by hand in case of emergency.
Figure5.10: Charging cabinet mounting dimensions
!
Caution!
LBB4560/00 Charger case for 56x LBB4540 - when powered, only use flat on a tabletop.
LBB4560/50 Charger cabinet for 56x LBB4540 - only use when wall-mounted.