To Next Page
B
bfigueroaSep 16, 2025
Why does my Bosch Conference System receiver discharge very quickly?
- SSteven MedinaSep 16, 2025
If your Bosch Conference System receiver discharges very quickly, replace the battery pack to see if that fixes the problem.
Why does my Bosch Conference System receiver discharge very quickly?
If your Bosch Conference System receiver discharges very quickly, replace the battery pack to see if that fixes the problem.
How to fix a Bosch Transmitter when the display does not light up?
If the display on your Bosch Transmitter doesn't light up, ensure that the mains supply is connected and that the transmitter is switched on.
What to do if the emergency contact on Bosch Transmitter does not work?
If the emergency contact on your Bosch Transmitter isn't working, check that it's connected correctly. Also, make sure the audio is connected according to the auxiliary input mode selected in menu 4I.
What does it mean when my Bosch Transmitter indicates radiator fault?
If your Bosch Transmitter indicates a 'radiator fault', ensure that all radiator connections have been made correctly and that each radiator’s mains supply is connected and switched on. Also, examine the radiator LEDs.
What to do if Bosch Conference System transmitter indicates 'radiator fault'?
If your Bosch Conference System transmitter indicates a 'radiator fault', ensure that all radiator connections are correctly made and that each radiator's mains supply is connected and switched on. You may also examine the radiator LEDs.
What to do if the Bosch Transmitter infra-red receiver fails to function properly?
If your Bosch Transmitter infra-red receiver isn't working correctly, here are a few things to check: * If using disposable batteries, make sure they have enough power and are inserted correctly. * If using a battery pack, ensure it's fully charged. * Verify the headphone is properly connected. * Turn on the receiver and check if the display shows a channel. * Make sure the receiver is getting enough IR signal, and the antenna symbol is visible. * Try enabling the mini radiator (menu 4M) and testing the receiver close to the transmitter's mini radiator. * Ensure the volume is turned up. * Put the transmitter in test mode to see if the test tone is audible on the receiver. If not, try the same test with other receivers. If all receivers fail at that spot, check the system's...
What to do if the emergency contact of my Bosch Electronic dictionary does not work?
If the emergency contact of your Bosch Electronic dictionary does not work, check that the emergency contact is connected correctly.
What to do if the transmitter of my Bosch Electronic dictionary indicates “radiator fault”?
If the transmitter of your Bosch Electronic dictionary indicates 'radiator fault', examine the radiator LEDs.
What to do if the transmitter display of my Bosch Electronic dictionary does not light up?
If the transmitter display of your Bosch Electronic dictionary doesn't light up, check that the main supply to the transmitter is connected and that the transmitter is switched on.
Why does my Bosch Transmitter receiver discharge so quickly?
If your Bosch Transmitter receiver discharges very quickly, replace the battery pack and check whether the problem is resolved.
Alerts users to potential hearing damage from prolonged high volume listening.
Details the core component of the system, its types, and connectivity options.
Describes the radiators that emit infrared radiation for audio distribution.
Explains the function and features of the multi-channel infrared receivers.
Steps for mounting and securing radiators in various installation scenarios.
How to connect the transmitter to the DCN Next Generation conference system.
Instructions for loop-through connection of radiators to the transmitter outputs.
Ensuring adequate IR radiation coverage and identifying potential dead spots.
A step-by-step guide to identify and fix common installation or operational issues.
Alerts users to potential hearing damage from prolonged high volume listening.
Details the core component of the system, its types, and connectivity options.
Describes the radiators that emit infrared radiation for audio distribution.
Explains the function and features of the multi-channel infrared receivers.
Steps for mounting and securing radiators in various installation scenarios.
How to connect the transmitter to the DCN Next Generation conference system.
Instructions for loop-through connection of radiators to the transmitter outputs.
Ensuring adequate IR radiation coverage and identifying potential dead spots.
A step-by-step guide to identify and fix common installation or operational issues.
General| Audio Transmission | Digital Infrared |
|---|---|
| Interoperability | Compatible with other Bosch conference systems |
| System Type | Infrared Conference System |
| Technology | Digital |
| Number of Channels | Up to 32 channels |
| Languages Supported | Up to 32 |
| Audio Quality | CD quality (16 bit, 48 kHz) |
| Power Supply | Varies depending on the device (e.g., 230 VAC, 50/60 Hz) |
| Control Interface | RS-232, Ethernet |
| Security | Secure transmission |
