Bosch INTEGRUS - User Manual

Other manuals for Bosch INTEGRUS

User Manual72 pages

Installation And Operating Manual60 pages

Installation And User Instructions20 pages

Installation And Operation Manual90 pages

Questions and Answers

M
morrisongabrielSep 4, 2025
What to do if the charging indicator LED on the receiver of my Bosch Electronic dictionary is blinking?
- C
  Christopher JohnsonSep 4, 2025
  If the charging indicator LED on the receiver of your Bosch Electronic dictionary is blinking, ensure that the charging unit is used under the specified working conditions. Also, make sure the receiver is at room temperature and then re-insert it into the charging unit. If the indicator continues to blink, replace the battery pack to see if that resolves the issue.
B
Benjamin MoonSep 3, 2025
What to do if the transmitter display of my Bosch Electronic dictionary does not light up?
- W
  Wayne WilkersonSep 3, 2025
  If the transmitter display of your Bosch Electronic dictionary doesn't light up, check that the main supply to the transmitter is connected and that the transmitter is switched on.
M
Mary WadeSep 2, 2025
What does it mean when both red and amber LEDs are on IRED panels of a Bosch Transmitter radiator?
- C
  Carrie JohnsonSep 2, 2025
  If both the red and amber LEDs are on for one or both IRED panels of a radiator on your Bosch Transmitter, the IRED panel is malfunctioning and the radiator should be replaced.
H
Holly TaylorSep 1, 2025
Why does my Bosch Transmitter receiver discharge so quickly?
- C
  Christopher BrownSep 1, 2025
  If your Bosch Transmitter receiver discharges very quickly, replace the battery pack and check whether the problem is resolved.
B
bjohnsonAug 31, 2025
What does it mean when the red LED flashes and amber LED is on of IRED panels of a Bosch Transmitter radiator?
- C
  Christopher WebbSep 1, 2025
  If the red LED flashes and the amber LED is on for one or both IRED panels of a radiator on your Bosch Transmitter, it could mean the IRED panel is in temperature protection mode. Check that the natural airflow around that radiator is not obstructed. If the airflow is not obstructed, replace the radiator.
M
Melissa BerryAug 30, 2025
How to synchronize Bosch Transmitter to the maximum number of channels in DCN?
- T
  Tracy SimpsonAug 31, 2025
  If the Bosch Transmitter doesn't automatically synchronize to the maximum number of channels in DCN, ensure that the number of channels is set to automatic using menu item 4B.
A
Andrew MedinaAug 29, 2025
Why does my Bosch Transmitter say no radiators?
- S
  Susan JohnsonAug 30, 2025
  If the Bosch Transmitter indicates 'no radiators', make sure that all radiator connections have been made correctly and that each radiator’s mains supply is connected and switched on.
D
Donna TorresAug 29, 2025
How to resolve a Bosch Transmitter network error?
- A
  Andrew HerreraAug 29, 2025
  If your Bosch Transmitter indicates a 'network error', enable the network mode (menu 4B) or disconnect the transmitter from the optical network.
S
saramartinAug 28, 2025
Why is the charging indicator LED on the Bosch Transmitter receiver blinking?
- T
  Trevor GonzalesAug 28, 2025
  If the charging indicator LED on the Bosch Transmitter receiver is blinking, verify that the charging unit is used under the specified working conditions (see technical data). Also, check that the receiver contains a battery pack which is connected correctly. Ensure that the receiver is at room temperature and re-insert the receiver in the charging unit. If the charging indicator starts blinking again, replace the battery pack and check whether the problem is resolved.
C
Cynthia RamirezAug 27, 2025
What does it mean when my Bosch Transmitter indicates radiator fault?
- J
  Joseph CrosbyAug 27, 2025
  If your Bosch Transmitter indicates a 'radiator fault', ensure that all radiator connections have been made correctly and that each radiator’s mains supply is connected and switched on. Also, examine the radiator LEDs.

Summary

Safety

Warning!

Alerts users to potential hearing damage from prolonged high volume listening.

System Overview

Integrus Transmitters

Details the core component of the system, its types, and connectivity options.

Integrus Radiators

Describes the radiators that emit infrared radiation for audio distribution.

Integrus Receivers

Explains the function and features of the multi-channel infrared receivers.

Installation

Integrus Transmitters

Medium and High Power Radiators

Steps for mounting and securing radiators in various installation scenarios.

Integrus receivers

Connection

Connect the DCN Next Generation system

How to connect the transmitter to the DCN Next Generation conference system.

Connect radiators

Instructions for loop-through connection of radiators to the transmitter outputs.

Configuration

Integrus transmitter

Setup the transmitter

Set channel quality and assign inputs to channels (4 D)

Integrus Radiators

Determine the radiator delay switch positions

System with one transmitter

Testing

Test the coverage area

Ensuring adequate IR radiation coverage and identifying potential dead spots.

Black spots

Operation

Integrus Receivers

Normal operation

Troubleshooting

Fault messages

Faultfinding guide

A step-by-step guide to identify and fix common installation or operational issues.

Summary

Safety

Warning!

Alerts users to potential hearing damage from prolonged high volume listening.

System Overview

Integrus Transmitters

Details the core component of the system, its types, and connectivity options.

Integrus Radiators

Describes the radiators that emit infrared radiation for audio distribution.

Integrus Receivers

Explains the function and features of the multi-channel infrared receivers.

Installation

Integrus Transmitters

Medium and High Power Radiators

Steps for mounting and securing radiators in various installation scenarios.

Integrus receivers

Connection

Connect the DCN Next Generation system

How to connect the transmitter to the DCN Next Generation conference system.

Connect radiators

Instructions for loop-through connection of radiators to the transmitter outputs.

Configuration

Integrus transmitter

Setup the transmitter

Set channel quality and assign inputs to channels (4 D)

Integrus Radiators

Determine the radiator delay switch positions

System with one transmitter

Testing

Test the coverage area

Ensuring adequate IR radiation coverage and identifying potential dead spots.

Black spots

Operation

Integrus Receivers

Normal operation

Troubleshooting

Fault messages

Faultfinding guide

A step-by-step guide to identify and fix common installation or operational issues.

Bosch INTEGRUS Specifications

General

Audio Transmission	Digital Infrared
Interoperability	Compatible with other Bosch conference systems
System Type	Infrared Conference System
Technology	Digital
Number of Channels	Up to 32 channels
Languages Supported	Up to 32
Audio Quality	CD quality (16 bit, 48 kHz)
Power Supply	Varies depending on the device (e.g., 230 VAC, 50/60 Hz)
Control Interface	RS-232, Ethernet
Security	Secure transmission