Attach mounting plate to the suspension bracket
In case of mounting on a floor stand and wall mounting, it is necessary to attach a mounting
plate to the suspension bracket.
The place of the mounting plate depends on the intended type of mounting.
– Refer to Mount radiator on a floor stand, page 37 in case of mounting on a floor stand.
– Refer to Mount radiator on a wall, page 38 in case of wall mounting.
Figure 5.4: Attaching the plate to the suspension bracket in case of mounting on a floor stand
Figure 5.5: Attaching the plate to the suspension bracket in case of wall mounting
5.3.1
36 en | Installation Language Distribution System
2013.11 | V1.4 | Operation manual Bosch Security Systems B.V.
To Next Page
Loading...
