Bosch INTEGRUS - Document History

94 pages

Save Page as PDF

To Next Page

To Previous Page

Document history

Release date Documentation version Reason

2013.10.24 V1.3 New document layout.

2013.11.29 V1.4 EOL product information

removed.

2.6

8 en | About this manual Language Distribution System

2013.11 | V1.4 | Operation manual Bosch Security Systems B.V.

Main Page

Table of Contents3
Safety6
About this Manual7
Purpose7
Intended Audience7
Related Documentation7
Alerts and Notice Signs7
Copyright and Disclaimer7
Document History8
System Overview9
Integrus Transmitters11
Audio Input and Interpreter Module13
Integrus Radiators14
Integrus Receivers17
Receiver Headphones18
Integrus Charging Units19
Planning20
System Technology20
IR Radiation20
Signal Processing21
Quality Modes21
Carriers and Channels22
Aspects of Infrared Distribution Systems23
Directional Sensitivity of the Receiver23
The Footprint of the Radiator23
Ambient Lighting25
Objects, Surfaces and Reflections26
Position the Radiators26
Overlapping Footprints and Black Spots29
Plan an Integrus Infrared Radiation System30
Rectangular Footprints30
Plan Radiators31
Cabling32
Installation33
Integrus Transmitters33
Audio Input and Interpreter Module33
Medium and High Power Radiators35
Attach Mounting Plate to the Suspension Bracket36
Attach the Suspension Bracket37
Mount Radiator on a Floor Stand37
Mount Radiator on a Wall38
Mount Radiator on a Ceiling40
Mount Radiator on Horizontal Surfaces40
Secure the Radiator with Safety Cord40
Integrus Receivers40
Integrus Charging Units41
Connection42
Integrus Transmitters42
Connect the DCN Next Generation System42
Connect Other External Audio Sources43
Connect an Emergency Signal44
Connect to Another Transmitter45
Connect Radiators46
Configuration48
Integrus Transmitter48
Overview48
Navigate through the Menu49
Example50
Setup the Transmitter51
Main Menu51
Set Transmission (4A)52
Set Network Mode (4B)52
Set Number of Channels (4C)53
Set Channel Quality and Assign Inputs to Channels (4D)54
Language List (4E)55
Set Channel Names (4F)55
Disable or Enable Carriers (4G)56
View Carrier Assignments (4H)56
Configure Auxiliary Inputs (4I)57
Set Sensitivity of the Inputs (4J, 4K, 4L)57
Enable / Disable IR-Monitoring (4M)58
Enable / Disable Headphone Output (4N)58
Choose Transmitter Name (4O)58
Reset All Options to Factory Default Values (4P)59
Integrus Radiators59
Set the Output Power Selection Switch59
Set the Delay Switches60
Determine the Radiator Delay Switch Positions60
System with One Transmitter60
System with Two or more Transmitters in One Room63
Systems with more than 4 Carriers and a Radiator under a Balcony65
Testing66
Integrus Transmitter66
Integrus Receiver67
Test the Coverage Area67
Operation69
Integrus Transmitter69
Start-Up69
View Transmitter Status69
Integrus Radiators69
Integrus Receivers70
Normal Operation70
Storage of Receiver71
Integrus Charging Units71
Troubleshooting72
Fault Messages72
Faultfinding Guide73
Service Requests75
Maintenance76
Technical Data77
Electrical Data77
Overall System Characteristics77
Transmitters and Modules77
Radiators and Accessories78
Receivers, Battery Packs and Charging Units78
Cables and Connectors80
Mechanical Data81
Transmitters and Modules81
Radiators and Accessories81
Receivers, Battery Packs and Charging Units82
Ambient Conditions83
Overall System Conditions83
Rules and Standards84
Overall System Conformance84
Guaranteed Rectangular Footprints85
Metric Values of Radiators with Hardware Version Higher than 2.0085
Imperial Values of Radiators with Hardware Version Higher than 2.0087
Metric Values of Radiators with Hardware Version Lower than89
Imperial Values of Radiators with Hardware Version Lower than91

Bosch INTEGRUS - Document History

Table of Contents

Other manuals for Bosch INTEGRUS

Related product manuals