KTS 340 start-up4.2.2
Supply the KTS 340 with voltage by way of the 1.
power supply unit provided.
The KTS 340 starts up. ?
The KTS 340 always starts up in English when first i
switched on.
Under "2. Menu >> Settings >> Language" select the
required KTS 340 language.
Use the USB connecting cable to connect the 3.
KTS 340 to a PC/Laptop.
The KTS 340 waits for licensing. ?
KTS 340 licensing by fax4.2.3
Select the "1. Licensing >> Fax" menu in the Start-
center.
The " ? Licence request" input box is opened.
Step 1: Enter company data.2.
Step 2: Select country for licence request.3.
Step 3: Enter ID number and print out licensing 4.
form.
Sign the licensing form and submit it by fax.5.
KTS 340 fax licensing procedure4.2.4
After receiving the licence key by fax, perform the
licensing procedure as follows:
Supply the KTS 340 with voltage by way of the 1.
power supply unit provided.
The KTS 340 starts up. ?
Use the USB connecting cable to connect the 2.
KTS 340 to a PC/Laptop.
Click onto the "3. Licensing >> Licensing procedure"
menu in the Startcenter.
The " ? Licence request implementation" input box
is opened.
Enter customer number, ID number and licence key.4.
Perform licensing.5.
The licence key is transferred. ?
If licensing is successful, the KTS 340 is re- ?
started.
The KTS 340 is now licensed and can be used for control "
unit diagnosis.
To Next Page
Loading...
