Bosch Rexroth BA1N - Dimension Sheets; BA1 N16 Frame Size with Cooling Mode Forced Ventilation

80 pages

To Next Page

To Previous Page

5 Dimension sheets

5.1 BA1N16 Frame size with cooling mode “forced ventilation”

Fig. 5-1: Dimension sheets BA1N16 with fan

BA1N Kinetic Energy Buffer 21/73

Dimension sheets

R911393264_Edition 01 Bosch Rexroth AG

Main Page

Table of Contents3
Introduction to the Product7
General7
About this Documentation8
Editions of this Documentation8
Document Structure8
Information Presentation8
Further Documentation9
Standards10
Additional Components10
Your Feedback10
Important Instructions for Use11
Intended Use11
Introduction11
Areas of Use and Application11
Inappropriate Use12
Safety Instructions for Electric Drives and Controls13
Definitions of Terms13
General Information14
Using the Safety Instructions and Passing Them on to Others14
Requirements for Safe Use14
Hazards by Improper Use15
Instructions with Regard to Specific Dangers16
Protection against Contact with Electrical Parts and Housings16
Protective Extra-Low Voltage as Protection against Electric Shock17
Protection against Dangerous Movements18
Protection against Electromagnetic and Magnetic Fields During Operation and Mounting19
Protection against Contact with Hot Parts20
Protection During Handling and Mounting20
Battery Safety20
Protection against Pressurized Systems21
Explanation of Signal Words and the Safety Alert Symbol22
Technical Data23
Operating Behavior23
Description of the Specified Parameters23
Technical Data24
Data Sheet BA1N1624
Forced Ventilation - BA1N16 Fan Data25
Water Cooling - Technical Data25
BA1N16 Characteristic Curves26
Dimension Sheets27
BA1N16 Frame Size with Cooling Mode "Forced Ventilation27
BA1N16 Frame Size with Cooling Mode "Water Cooling28
Type Codes29
Type Codes BA1N1629
Accessories31
Connection Technique33
Notes33
Electrical Connection34
Device Connector on the BA1N Energy Storage Device34
Selection Tables for Ready-Made Connection Cables35
Plug-In Connector with Threaded Connection35
Speedcon Connectors36
Temperature Sensor37
Cooling37
Fan Connection37
Coolant Connection38
Coolant Input Pressure39
Application Notes41
Operating Conditions41
Installation Altitude and Ambient Temperature41
Humidity42
Vibration and Shock42
Vibration42
Shock43
Degree of Protection43
Frame Shape and Installation Position44
General44
Paint44
Compatibility Test45
Cooling45
Forced Ventilation (IC416)45
Water Cooling (IC3W7)46
Thermal Winding Protection49
Encoder50
Technical Data50
Encoder Connection50
Bearings51
Hybrid Bearings (with Re-Lubrication Option)51
Run-Down and Follow-Up Time of the Rotor51
Acceptances and Approvals51
CE Mark51
Handling and Transport53
Delivery Status53
General53
Factory Test53
Customer Test53
Identification53
Identification54
Transport and Storage55
General Notes55
Transport Instructions55
Storage Instructions57
Installation59
Safety59
Mechanical Attachment59
Attachment59
Preparing Assembly61
Mounting the BA1N Energy Storage Device61
Electrical Connection61
General61
Operation of BA1N Energy Storage Device63
Commissioning63
General63
Preparation63
Procedure63
Shutdown64
Disassembly64
Maintenance65
General65
Measures65
Re-Lubrication of the Hybrid Bearings66
Fan67
Coolant Supply69
Troubleshooting69
General Information69
Temperature on the Housing Is too High69
High Energy Storage Device Values, but Housing Temperature Is Normal70
Energy Storage Device or Machine Table Generates Vibrations70
Environmental Protection and Disposal71
Environmental Protection71
Disposal71

Bosch Rexroth BA1N - Dimension Sheets; BA1 N16 Frame Size with Cooling Mode Forced Ventilation

Table of Contents

Other manuals for Bosch Rexroth BA1N

Related product manuals