Bosch Rexroth BA1N - Electrical Connection; Device Connector on the BA1 N Energy Storage Device

8.2 Electrical connection
8.2.1 Device connector on the BA1N energy storage device
View M58 and M17 device connectors (double cable connection)
Device connector
Power
①
Encoder
②
Connector size M58 M17
Output direction A-side / B-side fixed
Locking Thread SpeedCon
Tab. 8-1: Device connector for power and encoder
Contact arrangement M58, power
Designation
Power connection
Ax Bx
without brake
U1 A1
V1 A2
W1 A3
PE
5 TP(+)
6 TP(-)
7 n.c.
8 n.c.
9 n.c.
Tab. 8-2: Contact arrangement pin assignment M58, power
For installation instructions, see chapter 8 "Connection technique" on page
27.
Contact arrangement M17, encoder
Designation
Encoder connection
AS
1 VCC_Encoder (11V)
2 B+
3 B-
4 A+
5 A-
6 GND_Encoder
7 EncData+
8 EncData-
9 n.c.
Tab. 8-3: Contact arrangement pin assignment M17, encoder
For installation instructions, see chapter 8.4 "SpeedCon connectors" on
page 30.
28/73
Connection technique
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393264_Edition 01