12.6 Environmental protection and disposal
12.6.1 Environmental protection
Production processes
The products are manufactured in energy- and resource-optimized produc‐
tion processes which allow re-using and recycling the resulting waste. We
regularly try to replace pollutant-loaded raw materials and supplies by more
environment-friendly alternatives.
No release of hazardous substan‐
ces
Our products do not contain any hazardous substances which may be re‐
leased in case of appropriate use. Normally, our products will not have any
negative influences on the environment.
Significant components
Significant components of our products are:
Electronic devices Motors
∙ Steel ∙ Steel / Stainless steel
∙ Aluminum ∙ Aluminum
∙ Copper ∙ Copper
∙ Plastics ∙ Brass
∙ Electronic components ∙ Magnetic materials
∙ Elektronic components
12.6.2 Disposal
Return of products
Our products can be returned to us for disposal free of charge. However, this
requires that the products be free from oil, grease or other dirt.
Furthermore, the products returned for disposal may not contain any undue
foreign material or foreign components.
Deliver the products "free domicile" to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Buergermeister-Dr.-Nebel-Straße 2
97816 Lohr am Main, Germany
Packaging
Packaging materials consist of cardboard, wood and polystyrene They can
be recycled anywhere without any problem.
For ecological reasons, please refrain from returning the empty packages to
us.
Batteries and accumulators
Batteries and accumulators can be labeled with this symbol.
The symbol indicating "separate collection" for all batteries and accu‐
mulators is the crossed-out wheeled bin.
End users in the EU are legally bound to return used batteries and accumula‐
tors. Outside the validity of the EU Directive 2006/66/EC, the particularly ap‐
plicable regulations must be followed.
Batteries and accumulators can contain hazardous substances which can
harm the environment or people's health when improperly stored or disposed
of.
After use, the batteries or accumulators contained in Rexroth products must
be properly disposed of according to the country-specific collection systems.
Recycling
Most of the products can be recycled due to their high content of metal. In
order to recycle the metal in the best possible way, the products must be dis‐
assembled into individual assemblies.
BA1N Kinetic Energy Buffer 65/73
Operation of BA1N energy storage device
R911393264_Edition 01 Bosch Rexroth AG
To Next Page
Loading...
