9.5 Frame shape and installation position
9.5.1 General
BA1N energy storage devices are available in the type of construction IM B3.
The installation types allowed according to EN 60034-7 are shown in the fol‐
lowing table.
Frame size
Allowed installation types
Designation Drawing Installation
IM B3 IM 1001 Foot assembly, feet at the bottom
Tab. 9-5: Allowed installation positions
① Mounting feet (bilateral); hole clearance see dimension sheet
Fig. 9-3: Attachment of the BA1N energy storage device
9.6 Paint
Color
Black (RAL9005)
Resistance
Resistant against
● Diluted acids/lyes
● Water, seawater, sewage
● Current mineral oils
Resistant to a limited degree against
● Organic solvents
● Hydraulic oil
Not resistant against
● Concentrated acids/lyes
Additional paint
Allowed for:
Standard products.
The housing may be painted with a coating thickness of no more than 40 µm.
Before painting the housing, check the adhesiveness and resistance of the
new paint.
If motors are repainted, all safety labels, name plates and open
plug connectors must be covered to be protected against paint‐
ing.
38/73
Application notes
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393264_Edition 01
To Next Page
Loading...
