Non-compliance with this safety instructions can result in death or severe
personal injury.
Non-compliance with this safety instructions can result in moderate or minor
personal injury.
Non-compliance with this safety instructions can result in material damage.
Safety symbols
The following internationally standardized safety symbols and graphic sym‐
bols are used in this documentation. The meaning of the symbols is descri‐
bed in the table.
Safety symbols Significance
Warning against dangerous electric voltage
Warning against hot surfaces
Warning against overhead load
Electrostatic sensitive devices
No access for persons with cardiac pacemakers or implanted defibrilla‐
tors.
Do not carry along metal parts or clocks.
Tab. 1-3: Meaning of safety signs
Markup
The following markups are used for a user-friendly text information represen‐
tation:
Reference to supplementary documentation
This note gives important information, which must be observed.
● Listings on the first level contain a bullet point
– Listings on the second level contain a dash
1. Handling instructions are specified in numbered lists. Please comply
with the order of the handling instructions.
1.2.4 Further documentation
For the project planning of drive systems with energy storage devices of the
BA1N series, you will require further documentation such as "MLD Technolo‐
gy Function - Kinetic Buffering, R911397139".
BA1N Kinetic Energy Buffer 3/73
Introduction to the product
R911393264_Edition 01 Bosch Rexroth AG
To Next Page
Loading...
