900
1000
1100
1200
1300
1400
1500
1600
1700
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
Ohm
°C
PT1000
R
Fig. 9-6: Characteristic curve PT1000
Please observe the notes about connecting the temperature sensor in the
chapter "Connecting technique".
9.10 Encoder
9.10.1 Technical data
Encoder option AS
Design Singleturn
Protocol Hiperface®
Signal periods 16
Resolution -
Distinguishable rotations 1
System accuracy typical / maximum ±360´´ / ±520´´
Data transmission analog 1 Vpp
Supply voltage 7 ... 12 V
Current consumption < 50 mA
Functional safety EN IEC 61508 -
Functional safety EN ISO 13849 -
Single cable connection -
Double cable connection ●
● / - available/not available
Tab. 9-9: Technical data of encoder
9.10.2 Encoder connection
The position of the encoder connector on the energy storage device cannot
be changed. Notes on connecting the encoder can be found in tab. 8-1 "De‐
vice connector for power and encoder" on page 28.
For detailed information on the controller-side encoder connection, please re‐
fer to the documentation of the controllers.
44/73
Application notes
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393264_Edition 01
To Next Page
Loading...
