Classification of biological environmental conditions 2B1
Classification of chemically active materials 2C2
Classification of mechanically active materials 2S2
Classification of mechanical ambient conditions 2M1
Tab. 10-1: Allowed classes of ambient conditions during transport
For a better overview, some essential environmental influencing variables of
the previously mentioned classifications are listed. Unless otherwise speci‐
fied, the specified values are the values of the particular class. However,
Bosch Rexroth reserves the right to adjust these values at any time based on
future experiences or changed environmental factors.
Allowed transport conditions
Environmental factor Symbol Unit Value
Temperature
T
T
°C
-20 ... +80
1)
Air humidity
(relative air humidity, cannot be com‐
bined with a quick temperature
change)
φ % 75 (at +30 °C)
Occurrence of salt mist
Not permitted
1)
1) Differs from DIN EN 60721-3-2
Tab. 10-2: Allowed transport conditions
Before transport, empty the liquid coolant from the liquid-cooled
BA1N energy storage device to avoid frost damage.
50/73
Handling and transport
BA1N Kinetic Energy Buffer
Bosch Rexroth AG R911393264_Edition 01
To Next Page
Loading...
