Bosch Rexroth CS660 - Air Gate; Gate Readback and Automatic Gate

19/27
Bosch Rexroth Canada I March 2021 ı Revision 3.0
‘D’ – Single Spn, ‘D’ – Dual Spn
Toggle 1
st
 3
rd
materials & calibrated gates
A digIn (Junction Box or CANIO board)
A digIn (Junction Box or CANIO board)
3.6 Air Gate
This feature supports air gate operation. It requires a digital input to monitor the air cylinder position.
When the input status changes the controller switch between 1
st
and 3
rd
solid and prewet materials, and
also set operation gate position to calibrated gate position for the material selected.
3.7 Gate Readback and Automatic Gate
Gate Readback Automatic Gate
It requires a gate sensor to measure It requires a gate cylinder with a
the current gate position. sensor to measure the gate position.
Sensor  A2-A (Junction box) Sensor  A2-A (Junction box)