Bosch Rexroth CS660 - Knob) Spreader+3 Boom Anti-Ice; Knob) Spreader+Cross Conveyor; Knob) Spreader+3 Boom Anti-Ice + Cross Conveyor

21/27
Bosch Rexroth Canada I March 2021 ı Revision 3.0
3.10 (4 knob) Spreader + 3Boom Anti-ice
This configuration utilizes a 4 knob console, and controls a spreader (spinner, conveyor, prewet) and
a 3boom anti-ice simultaneously. It requires 3 digital inputs (junction box or CANIO board) and 3 digital
outputs for boom control.
To configure valve outputs it is highly recommended to use AUTONULL functions with sensors.
3.11 (4 knob) Spreader + Cross Conveyor
This configuration utilizes a 4 knob console, and controls a spreader and a cross conveyor
simultaneously. It requires a digital input to switch cross conveyor direction (Left  Right).
3.12 (4 knob) Spreader + 3Boom Anti-ice + Cross Conveyor
This configuration utilizes a 4 knob console, and controls a spreader + a cross conveyor + 3boom anti-
ice systems simultaneously. It requires 4 digital inputs for controlling booms and cross conveyor direction.