Bosch Rexroth Canada I March 2021 ı Revision 3.0
Press to enter a new profile
name, then press create profile.
List of
existing
profiles
Press and hold Sync icon to pop
up profile configuration window
Configure 4
th
driver to ‘USER’
Click on Sync icon to sync all
configured profiles to a PGM key
Press and hold blank area to
pop up profile selection windows
Select a profile, click ‘Apply Profile’
4 Set up Profiles
Profiles allow the operator quick selection of different system configurations. One example could be
a profile called “Standard” used for typical spreading operation and another called “DLA” for dedicated anti-
icing applications. These are only examples and any configuration made in settings can be saved as a profile.
STEP 1 Check ‘Enable profiles’, and set 4
th
Driver to ‘USER’ (see screens below).
STEP 2 Press the toobox icon to display all additional system options.
Note: Set system up as desired before creating profile
Operator can select a profile on operator screen without a PGM key when the vehicle isstationary.
To Next Page
Loading...
