92
/110
Bosch Rexroth AG ErgoSpin/CC-ErgoSpin
| 3608870DD4/2015-09
Extension and conversion
13 Extension and conver-
sion
The components of the ErgoSpin/
CC-ErgoSpin hand-held nutrunner may not
be converted, i.e., the components may nei-
ther be opened nor disassembled nor may
the mechanical properties (dimensions,
holes, etc.) be changed. In case of non-com-
pliance, the warranty claim will be forfeited.
13.1 Output drives for ESV
Tab.11: ESV angle heads
*)
*)
Can also be used with CC-ESV
WH013S
WH013G
WH040S
WH040G
WH056S
WH056G
WH065S
WH065G
Order number (...S) 3 608 876 051 3 608 876 055 3 608 876 057 3 608 876 059
Order number (...G) 3 608 876 052 3 608 876 056 3 608 876 058 3 608 876 060
Max. torque
**)
[Nm]
**)
Value refers to angle head
13 40 56 65
Typical efficiency η = 0.95 η = 0.95 η = 0.95 η = 0.95
Reduction ratio i = 1.095 i = 1.73 i = 1.16 i = 1.35
Tool mount 1/4'' square 3/8'' square 3/8'' square 1/2'' square
WH075S
WH075G
WH100S WH150S WH220S
Order number (...S) 3 608 876 061 3 608 876 063 3 608 876 064 3 608 876 065
Order number (...G) 3 608 876 062 - - -
Max. torque **) [Nm] 75 100 150 220
Typical efficiency η = 0.95 η = 0.95 η = 0.95 η = 0.95
Reduction ratio i = 1.563 i = 1.421 i = 1.095 i = 1.588
Tool mount 1/2'' square 1/2'' square 1/2'' square 3/4'' square
To Next Page
Loading...
