Bosch Rexroth ErgoSpin - 15 Technical Data

DEUTSCH
ENGLISH
ITALIANO
ESPAÑOL
SVENSKA
FRANÇAIS
ENGLISH
ENGLISH
3608870DD4/2015-09 | ErgoSpin/CC-ErgoSpin Bosch Rexroth AG 95 /110
Technical data
15 Technical data
The A-weighted noise pressure level of the product is typically ≤ 65 dB (A).
The hand-arm vibration is typically lower than 2.5 m/s
2
.
The accuracy according to VDI/VDE2647 across a range of 6S in
• ESM and ESV systems with straight output drive is less than ± 3 %,
• ESA and ESV with angle head or offset output drive is less than ± 4 %,
• CC-ESM and CC-ESV with straight output drive is less than ± 5 %,
• CC-ESA and CC-ESV with angle head or offset output drive is less than ± 7 %.
Tab.15: General information
General information
Protection class IP 40
Protection class I (protective grounding)
Interference suppression Limit class A according to EN 55011
Electric connection 11-pin round plug
Allowed ambient temperature 0 °C … + 40 °C
Allowed storage temperature – 20 °C … + 70 °C
Allowed air humidity during operation 20–80 %
Allowed air humidity during storage 20–90 %