94
/110
Bosch Rexroth AG ErgoSpin/CC-ErgoSpin
| 3608870DD4/2015-09
Troubleshooting
14 Troubleshooting
Failures and information on faults are dis-
played in the tightening system and/or its op-
erating program, e. g. BS350 (ErgoSpin),
BS350 CC-ES (CC-ErgoSpin, until the
BS350 Standard with V2.400 has been in-
troduced).
If you are not able to remedy a defect,
please contact one of the addresses that
you can either find at
http://www.boschrexroth.com or in sec-
tion "Service and sales" on page 100.